G-FL2D11T4F6
top of page

ADD61S
AHD Rear Sensor System

Part Number: ADD61S 

The next generation of the ADD60S — now in AHD, with the distance shown right on your monitor.

Increase your vehicle safety by adding a Verity ADD61S Sensor System. Four rear sensors detect objects from 8 inches to 9 feet behind the vehicle. The distance appears as a number on your monitor screen, and the in-cab buzzer beeps faster as the vehicle gets closer.

Works with the SM7FE and all Verity AHD (Analog High Definition) Rear Vision Systems. Monitor system sold separately.

When you purchase a Verity rear vision system, you’re getting more than a camera and a monitor. 
You’re getting 25 years of commercial vehicle experience, a product tested before it ships, and a team that picks up the phone when your engineers or installers have questions.

Fleets & OEMs: Call for Pricing   574-807-6002

​What's New Compared to the ADD60S

  • AHD video format

  • Detects as close as 8 inches (ADD60S: 11 inches)

  • New numeric distance display on the monitor

  • New ECU housing, rated IP68

  • Remembers fixed rear obstacles, such as grab rails,
    to stop constant alarms

  • Adjustable buzzer volume: Off / Lo / Hi

ALL NEW CLEAR
DISPLAY in FEET

Key Features

  • Four sensors cover the full rear of the vehicle

  • Detects objects from 8 inches to 9 feet

  • Numeric distance shown on the monitor screen

  • In-cab buzzer beeps faster as objects get closer, with a solid tone under 2 ft

  • Buzzer volume switch: Off / Lo / Hi (Off is for maintenance only)

  • Remembers fixed rear obstacles, such as grab rails, to prevent constant alarms

  • Universal 4-pin waterproof aviation connectors — any sensor plugs into any harness port

  • The buzzer is the only 2-pin connection, so it cannot be wired to the wrong port

  • 5° and 10° angle rings included for mounting surfaces angled up to 10°

  • Built-in surge and reverse polarity protection

  • Designed and tested in the USA — field-tested, not just bench-tested

​Specifications

  • Part number: ADD61S 

  • Video format: AHD

  • Compatibility: SM7FE and all Verity AHD Rear Vision Systems

  • Number of sensors: 4

  • Detection range: 8 in to 9 ft

  • Blind area: Less than 8 in

  • Operating voltage: 12–32 V

  • Rated current: 60 mA

  • Operating temperature: -4°F to +158°F (-20°C to +70°C)

  • ECU rating: IP68

  • Sensor hole size: 24.4–25.4 mm (0.96–1.00 in)

  • Sensor spacing: 19–31 in (50–80 cm); 31 in maximum

  • Sensor mounting height: 24 in (60 cm) minimum

  • Sensor connectors: 4-pin waterproof aviation

  • Sensor extension cables: 2 m each (4 included)

  • Camera cable: 10 m

  • Buzzer: In-cab, volume switch Off / Lo / Hi

  • Warranty: 1-year limited

 

How the Warning Works

The closer the object, the faster the buzzer beeps. The distance shows as a number on the monitor.

  • 0–2.0 ft (0–0.6 m): Solid tone

  • 2.0–3.9 ft (0.6–1.2 m): Fast beeps

  • 3.9–5.9 ft (1.2–1.8 m): Medium beeps

  • 5.9–7.9 ft (1.8–2.4 m): Slow beeps

  • 7.9–9 ft (2.4–2.7 m): Very slow beeps

 

What's in the Box

  • ECU (new housing)

  • 4 sensors with O-rings

  • 5° and 10° angle adjustment rings

  • Adjustable in-cab buzzer

  • 4 sensor extension cables, 2 m each

  • Sensor harness

  • 10m 4-pin camera cable 

  • 2-pin buzzer extension cable

Monitor and camera are sold separately.

 

​

 

​

​​​​

Parts.png

Download
Manual

Wiring Diagram

bottom of page